Chas. G. Allen Co., Inc.

Finishing Systems

Harperizers - Buff, Brush & Polish - Turbo Finish
Custom Machinery - Contract Manufacturing

[ Home ] [ Up ] [ Company Profile ] [ Products ] [ Services ] [ News ] [ Contact Us ]

Harperizers

In addition to the four different model Harperizers featured on the attached pages there also are three other model machines available. The 2RB-15L, 4RB-15L and the Model 2VM-13 machine. The 15L machines have a machine capacity of 1.44 and 2.88 cubic feet respectively, provide G forces from 0 to 25 and are equipped with horizontal axis drums. The 2VM-13 has a total machine capacity of .62 cubic feet, provides G forces form 0 to 19 and is equipped with 2 vertical axis drums..

Shown here is the Model 2VM-13 Harperizer.

This photo shows a Model 2RB-15L. You can see the removable barrel on the floor in front of the machine. These machines are very similar to the 12" Model machines.

This graphic shows the basis of Harperizing.

If you have a finishing problem you think may be solved by one of Allen's Harperizer models please contact Allen at the address below. Or fill out your request on the "Contact Us" page.

Contact Information

Telephone

978-355-2911

FAX

978-355-2917

Postal address

Chas. G. Allen Co., Inc.

25 Williamsville Road

          Barre, MA 01005

Electronic mail

General Information:       info@chasgallen.com

Sales:                          sales@chasgallen.com